مرشح إزالة البُر AL-KO POWER UNIT 300AL-KO
POWER UNIT 300P
مرشح إزالة البُر AL-KO POWER UNIT 300
AL-KO
POWER UNIT 300P
السعر الافتتاحي دون ضريبة القيمة المضافة
١٠٬٠٠٠ €
سنة الصنع
٢٠١٩
الحالة
مستعمل
الموقع
Varpaisjärvi 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- مرشح إزالة البُر AL-KO POWER UNIT 300
- المصنّع:
- AL-KO
- الموديل:
- POWER UNIT 300P
- سنة الصنع:
- ٢٠١٩
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٩٠٠ h
السعر والموقع
السعر الافتتاحي دون ضريبة القيمة المضافة
١٠٬٠٠٠ €
- الموقع:
- Varpaisjärvi, فنلندا

اتصل
تفاصيل العرض
- معرّف القائمة:
- A20639930
- التحديث الأخير:
- في ٢٩.١١.٢٠٢٥
الوصف
As-new AL-KO POWER UNIT 300P dust extraction filter, 2019
Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing.
Buyer is responsible for dismantling and removal of the unit.
The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors!
Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter.
By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB!
In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium.
POWER UNIT 300P
- Extraction port D 300 mm, max. air flow 6,000 m³/h
- Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l
- Includes compressed air cleaning
Bedpjxz Rg Isfx Afledk
- Includes automatic shutoff system
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing.
Buyer is responsible for dismantling and removal of the unit.
The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors!
Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter.
By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB!
In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium.
POWER UNIT 300P
- Extraction port D 300 mm, max. air flow 6,000 m³/h
- Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l
- Includes compressed air cleaning
Bedpjxz Rg Isfx Afledk
- Includes automatic shutoff system
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+358 44 2... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Bitburg
٣٬٣٠٤ km
نظام شفط الهواء النظيف
AL-KOPower Unit 300 P
AL-KOPower Unit 300 P
إعلان صغير
Bad Honnef
٣٬٣١٥ km
شفاط غبار الهواء النظيف AL-KO POWER UNIT 300 P
AL-KOReinluftentstauber AL-KO POWER UNIT 300 P
AL-KOReinluftentstauber AL-KO POWER UNIT 300 P
إعلان صغير
Euskirchen
٣٬٣٤٤ km
Deduster
AL-KOPOWER UNIT 300 P
AL-KOPOWER UNIT 300 P
إعلان صغير
Schwanberg
٢٬٦٠٨ km
نظام الاستخراج المحمول
AL-KOPower Unit 300 P
AL-KOPower Unit 300 P
إعلان صغير
Bitburg
٣٬٣٠٤ km
Deduster
AL-KoPower Unit 300 P - sofort verfügbar
AL-KoPower Unit 300 P - sofort verfügbar
إعلان صغير
Bitburg
٣٬٣٠٤ km
مزيل الهواء النظيف (نظام الاستخراج)
AL-KOPOWER UNIT 300 P - sofort verfügbar -
AL-KOPOWER UNIT 300 P - sofort verfügbar -
تم حذف إعلانك بنجاح
حدث خطأ


























