آلة تقطيع خيوط الحبيباتAccrapack Systems LTD
Series 750 Pelletizer
آلة تقطيع خيوط الحبيبات
Accrapack Systems LTD
Series 750 Pelletizer
FCA في بي بالإضافة إلى ضريبة القيمة المضافة
٦٬٥٠٠ €
سنة الصنع
٢٠١١
الحالة
مستعمل
(وظائف محدودة)
الموقع
Bergen op Zoom 

البيانات الأساسية
- اسم الماكينة:
- آلة تقطيع خيوط الحبيبات
- الشركة المصنعة:
- Accrapack Systems LTD
- طراز:
- Series 750 Pelletizer
- سنة الصنع:
- ٢٠١١
- الحالة:
- جاهز للاستخدام (مستعمل)
- الوظائف:
- وظائف محدودة
السعر والموقع
FCA في بي بالإضافة إلى ضريبة القيمة المضافة
٦٬٥٠٠ €
- الموقع:
- Bergen op Zoom, هولندا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A23348531
- تحديث:
- آخر مرة في 17.11.2026
وصف
The Accrapak Systems Ltd Series 750 is a compact, base-mounted dry-cutting strand granulation and downstream system for thermoplastic materials.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
Iedpe Akvlxofx Akgeii
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
Iedpe Akvlxofx Akgeii
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد: الأسبوع الماضي
مسجل منذ: 2026
١٩ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+43 660 2... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ
































