الجرف الثقيلة4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
الجرف الثقيلة
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
في بي بالإضافة إلى ضريبة القيمة المضافة
١٬٤٩٠ €
سنة الصنع
٢٠٢٤
الحالة
آلة عرض
الموقع
Bad Feilnbach 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- الجرف الثقيلة
- الشركة المصنعة:
- 4 Stück Kragarmregal-Ständer einseitig
- سنة الصنع:
- ٢٠٢٤
- الحالة:
- كالجديدة (آلة عرض)
السعر والموقع
في بي بالإضافة إلى ضريبة القيمة المضافة
١٬٤٩٠ €
- الموقع:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A5776089
- تحديث:
- آخر مرة في ٢٨.٠١.٢٠٢٥
وصف
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
Bljdpfx Asguk A Hog Ref
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
Bljdpfx Asguk A Hog Ref
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 8064 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
ألمانيا
٣٬٢٢٥ km
مركز تصنيع CNC مع تخزين اللوحة
Holz-HerDynestic 7532 10.5 automatic mit Store-Master 511
Holz-HerDynestic 7532 10.5 automatic mit Store-Master 511
إعلان صغير
Sierakowska Huta
٣٬٢٣٧ km
ماكينة تقطيع الأخشاب
KOHLBACH THW-30/30
KOHLBACH THW-30/30
إعلان صغير
Bad Feilnbach
٢٬٨٥٢ km
رف ناتئ
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
إعلان صغير
Grünkraut
٢٬٩٦٩ km
مفرمة أسطوانية/مفرمة خشب
S&F GmbHATH 300
S&F GmbHATH 300
إعلان صغير
Stary Dwór
٣٬١٣٥ km
ماكينة تقشير البصل
ProdMaCB-80
ProdMaCB-80
إعلان صغير
Sindelfingen
٣٬٠٧٨ km
رافعة تخزين
KardexShuttle XP-500-2450-813
KardexShuttle XP-500-2450-813
إعلان صغير
Radeberg
٣٬٠٦١ km
مضخة طرد مركزي من الفولاذ المقاوم للصدأ مضخة من الفولاذ المقاوم للصدأ
KSBCPK-CM 250-315 / CPKN-C1 250-315
KSBCPK-CM 250-315 / CPKN-C1 250-315
إعلان صغير
Helmstedt
٣٬٢٧٨ km
البناء الصلب للأوناش
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
إعلان صغير
Sigulda
٣٬٤٠٩ km
مجفف طرد مركزي (جهاز الطرد المركزي)
Alistar EuropeVSD500
Alistar EuropeVSD500
إعلان صغير
Domaszék
٢٬٣٦٤ km
MKT 100 صينية تجميع قابلة للدوران مع جهاز استشعار
Maurer GépMKT 100
Maurer GépMKT 100
تم حذف إعلانك بنجاح
حدث خطأ























































































