آلة الانحناءBluhm Systeme
e-SolarMark FL
آلة الانحناء
Bluhm Systeme
e-SolarMark FL
سعر ثابت دون ضريبة القيمة المضافة
٤٬٨٠٠ €
الحالة
مستعمل
الموقع
Borken 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٤٬٨٠٠ €
- الموقع:
- Einsteinstraße 8a, 46325 Borken, DE
اتصل
بيع الآلات

هل وجدت آلة جديدة؟ الآن حوّل القديم إلى مال.
احصل على أفضل سعر من خلال Machineseeker.
المزيد عن بيع الآلات
المزيد عن بيع الآلات
تفاصيل العرض
- معرّف القائمة:
- A14565049
- الرقم المرجعي:
- 23922
- التحديث الأخير:
- في ١٥.١١.٢٠٢٤
الوصف
Bluhm Systeme marking lasers
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Dsdpoq Rtz Hjfx Aalewc
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Dsdpoq Rtz Hjfx Aalewc
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+49 2861 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ